Analysis, support and tools
Building energy analysis and retrofit planning
An energy analysis maps how a building or home uses energy today and calculates which upgrades give the best return. For building owners, whether a municipality, a housing cooperative, a property company or the owner of a single commercial building, it is the basis for investment decisions, Enova applications and reporting.
From audit to retrofit plan
The analysis starts with a model of the building as it is, calibrated against measured energy use where available. Each upgrade is then calculated, and upgrades are combined into packages, because the effect of one depends on what has already been done.
- Energy savings and peak load reduction per upgrade
- Investment, profitability and payback time
- Life-cycle cost with net present value and internal rate of return
- Sequence: building envelope before systems, so systems can be sized correctly
Mandatory energy audits
Since 2024, Norwegian enterprises with an average annual energy use of 2.5 GWh or more must carry out regular energy audits. The first audit was due by October 1, 2026. For many property companies, this means energy analyses of their buildings must be systematic and repeatable.
Support and financing
Enova supports energy upgrades in commercial buildings under its own criteria and rates, which change over time. A good analysis shows both the calculated effect and the profitability without support, so the decision holds even if the rates change.
How Proff handles it
Retrofit analysis on the same model as the calculation
In Proff, upgrades are calculated on the same model as the energy calculation, so you do not need a separate spreadsheet on the side.
- Upgrade packages with savings, cost, net present value, internal rate of return and payback time
- Enova support estimates, with rates and conditions checked for small houses
- Retrofit plan with status for each upgrade
- Energy plan as a PDF report for the building owner
Questions and answers
The energy label gives a grade under standardized assumptions. An energy analysis goes deeper, often with measured data, and ends in a retrofit plan with costs and returns.
Sources and regulations
Always check the current version of regulations and standards before using the numbers in a project.
Read next
Energy labels for commercial buildings
When commercial buildings need an energy certificate, who may issue it and what changed in 2026.
Peak loads and overheating in buildings
Design heating and cooling loads, and hours with too high indoor temperature.
Building energy calculation software
What to require from software for energy calculation and energy simulation.
Spend your time on judgment, not data entry
Proff gathers available building data, reads floor plans and builds an editable model, so you can calculate everything from houses to hospitals without the detours.