gadder

Energy calculation with Gadder Proff

Energy calculation for every building, large and small

Gadder Proff is a new generation of energy calculation software: AI that reads your drawings, visual modeling in 2D and 3D, and import from BIM and CAD. Below you will also find the methods and requirements, for detached houses, apartment blocks, schools, offices, commercial buildings and everything in between.

What is an energy calculation?

An energy calculation shows how much energy a building or home needs for heating, cooling, ventilation, hot water, lighting and equipment under standardized conditions. The result is used to document the energy requirements in the Norwegian building regulations, to issue an energy performance certificate, and to find out which upgrades actually make a difference.

In Norway, NS 3031 is the foundation. The standard sets the input data for each building category and describes how energy need, delivered energy and peak loads are calculated. Under NS 3031:2025 the calculation must be dynamic, with a time step of one hour or less, for example hour by hour or quarter hour by quarter hour, where the building is modeled with zones, constructions, windows and technical systems. The monthly method in the 2014 edition, which TEK17 still refers to, has been removed.

The quality of the answer depends mostly on the model: correct geometry, correct U-values and correct system data. That is also where most of the time goes. The pages below explain the methods and the requirements, and where modern software can save work without losing traceability.

Why Gadder Proff

We are challenging the way energy calculation has always been done

Traditionally, an energy calculation starts with someone building the model by hand, room by room. Gadder Proff is built for a new workflow: the data you already have becomes a model, and the professionals spend their time on judgment. At the same time, the calculation rests on the same professional foundation as the rest of the industry.

  • AI reads the drawings

    Upload floor plans as PDF, image, DWG or DXF, and Proff creates walls, zones, windows and doors automatically.

  • Visual model in 2D and 3D

    With smart drawing you build the model graphically right on the floor plan: scale, zones, windows, doors and technical systems. See the result in 3D.

  • Import from Revit, ArchiCAD and AutoCAD

    Load IFC and gbXML from BIM tools and DWG or DXF from AutoCAD. Export to IFC, gbXML, Excel and PDF.

  • Approved by Enova

    Proff is one of three applications Enova has approved for direct registration of energy labels, for homes and non-residential buildings.

  • Validated calculation

    Dynamic calculation under NS 3031:2025, checked against NS-EN 15265 with accuracy level A in all twelve test cases.

  • Every building, large and small

    All 13 building categories, from detached houses and apartment blocks to schools, hospitals and commercial buildings, with as many zones as the building needs.

Book a Proff demo

Method

How energy need, peak loads and heat loss are calculated, and the standards behind them.

Requirements and documentation

Energy certificates, TEK17 energy requirements, energy labeling of commercial buildings and passive house criteria: what is required and how it is documented.

Analysis, support and tools

From calculated energy need to a prioritized retrofit plan, Enova support, and what to expect from the software you calculate in.

Building types and professionals

Energy calculation for commercial buildings and homes, and how energy consultants, architects, surveyors and builders use it.

Always check the regulations

Requirements, standards and programs change. Our pages explain and link onward, but the regulations and standards themselves are what count.

See Proff on your own projects

A demo takes 30 minutes. We show the whole path from floor plan or address to finished calculation and energy certificate.