Building types and professionals
Energy calculation for homes
An energy calculation of a home shows how much energy it needs, which energy grade it gets and which upgrades pay off. It is needed when the home is built, when a new home is labeled and when a renovation is planned.
When does a home need an energy calculation?
These are the most common occasions:
- New builds and major renovations: documenting the TEK17 energy requirements
- New homes: an energy certificate issued by an expert before handover
- Renovation: choosing upgrades and their order before money is spent
- Complex homes: a precise certificate where self-registration is too rough
TEK17 requirements for small houses and apartment blocks
For small houses the energy frame is 100 + 1600 divided by the heated floor area, in kWh per m² per year, and for apartment blocks it is 95. Homes can also comply through the measures model, which has nine specific requirements covering U-values, air tightness and heat recovery among others. The minimum requirements in section 14-3 also apply.
What the calculation includes
A good calculation for a home is based on the actual constructions and systems:
- The building envelope: U-values for walls, roof, floor and windows, thermal bridges and air tightness
- Ventilation and heat recovery
- Heating and hot water, for example a heat pump, panel heaters, district heating or a wood stove
- On-site electricity from solar panels
How Proff handles it
Homes in Gadder Proff
Proff calculates detached houses, row houses and apartment blocks with the same dynamic method as commercial buildings.
- Automatic check of the TEK17 requirements for small houses, including the energy frame, minimum requirements and measures model
- Passive house check under NS 3700
- Model from a floor plan, condition report or address
- Energy certificates sent straight to Enova for small houses and apartment blocks
Questions and answers
The certificate is the result registered with Enova. The energy calculation is the work behind it, and it can also be used for TEK17 documentation and for choosing upgrades.
Sources and regulations
Always check the current version of regulations and standards before using the numbers in a project.
Read next
Energy performance certificates in Norway
When you need an energy certificate, what it costs and who can issue it, for homes and commercial buildings.
Energy requirements in TEK17
Energy frames per building category, minimum requirements and how compliance is documented.
Passive house calculation: NS 3700 and NS 3701
The criteria for passive houses and low-energy buildings, and how they are documented.
Spend your time on judgment, not data entry
Proff gathers available building data, reads floor plans and builds an editable model, so you can calculate everything from houses to hospitals without the detours.