gadder
All energy calculation guides

Requirements and documentation

Energy performance certificates in Norway

The energy certificate shows a building's energy grade from A to G and suggested upgrades. It is required when you sell or lease, and when a new building is completed. You can often label an existing home yourself. New buildings, non-residential buildings and complex buildings need an expert, and that is where Gadder Proff comes in.

When is an energy certificate required?

The certificate is valid for ten years. It is required in these cases, among others:

  • When you sell or lease a home
  • When you sell or lease a non-residential building
  • When a new building is completed, and then always issued by an expert
  • When more than 250 m² of a building is used by public authorities and the building is often visited by the public
Result in Gadder Proff for an example building with energy grade C, weighted delivered energy and the NS 3031 calculation chain
The energy grade as shown in Proff before the certificate is sent to Enova. The figures are from an example building.

How do I get an energy certificate for my home?

Most people can label an existing home themselves in Enova's energy labeling system, logging in through ID-porten. It takes a few minutes and is free. New homes must always be labeled by an expert, and for buildings with several parts of different standards, an expert with calculation software gives the most precise certificate. Whoever fills it in, the owner is responsible for the information being correct.

How much does an energy certificate cost?

Labeling your home yourself with Enova is free. If you use an energy consultant, you pay for the work, and the price depends on the size of the building, how complex it is, and which drawings and information are available. The better the material, the faster it goes.

Energy certificates for commercial buildings

Non-residential buildings must always be labeled by an expert who meets the competence requirements in the energy labeling regulation. That covers offices, shops, schools, hotels and other buildings that are not homes. The rules are covered in more detail on the page about energy labels for commercial buildings.

The energy grade from A to G

The energy grade runs from A, which is very energy efficient, to G. A new energy labeling regulation with a new grade scale applies from January 1, 2026, and the grade is a single letter. Certificates issued before then may also have a heating grade shown as a color.

How Proff handles it

Energy certificates with Gadder Proff

Gadder Proff is one of three applications Enova has approved for direct registration of energy labels. Energy consultants and engineers build the model, calculate the energy grade and send the certificate straight to Enova's energy labeling system, for both homes and non-residential buildings.

  • From floor plan, BIM model or address to a finished energy certificate
  • Energy grade A to G under NS 3031:2025
  • Checks of the information before submission
  • Recommended upgrades with calculated effect and profitability
Book a Proff demo

Questions and answers

Yes, for an existing home you can do it yourself in Enova's energy labeling system. It is free and takes a few minutes. New homes must be labeled by an expert.

Sources and regulations

Always check the current version of regulations and standards before using the numbers in a project.

Read next

Spend your time on judgment, not data entry

Proff gathers available building data, reads floor plans and builds an editable model, so you can calculate everything from houses to hospitals without the detours.