gadder
All energy calculation guides

Analysis, support and tools

Enova support for commercial buildings

Enova supports energy upgrades in existing non-residential buildings, both the upgrades themselves and pre-studies that give a basis for decisions. What the programs have in common is that they rely on official energy certificates and calculations under NS 3031:2025. Enova closed applications for investment support on November 12, 2026, and reopens in the first week of 2027 with adjusted conditions. Always check the current conditions with Enova.

Support for improving the energy performance

The program supports upgrades that reduce calculated delivered energy, such as added insulation, heat recovery, heat pumps and solar panels. The owner or tenant can apply, and applications compete for funding. These were the conditions in November 2026:

  • At least 20 percent lower calculated delivered energy in the local climate, per building
  • At least 20 percent lower net energy need, or at least 10 percent if only one upgrade is made
  • An official energy certificate dated January 1, 2026 or later before the upgrades, and a new one after
  • Support of up to 25 percent of approved costs, and up to NOK 10 million

Pre-study support

Pre-study support covers a decision basis for one to three specific upgrades, not a general survey. The building must have an official energy certificate dated January 1, 2026 or later with energy grade C or worse, and the work must be done by a product-independent party. Support was up to 50 percent, and up to NOK 300,000.

What the calculation must show

The application is based on delivered energy from the certificate before the upgrades and the planned reduction in kWh per year. After the upgrades, a new certificate is needed, and in some cases an energy calculation using the same method. It therefore pays to use the same model throughout: from the certificate before, through the upgrade packages, to the certificate after.

How Proff handles it

The Enova application with Gadder Proff

Proff creates the certificates before and after in the same model as the upgrade analysis, and sends them straight to Enova's energy labeling system.

  • Energy certificates under NS 3031:2025, registered directly with Enova
  • Upgrade packages with the reduction in delivered energy and net energy need per building
  • Profitability with net present value, internal rate of return and payback time
  • Estimated Enova support per upgrade
Book a Proff demo

Questions and answers

Yes. Under the conditions in November 2026, the certificate had to be dated January 1, 2026 or later. Certificates under the new energy labeling regulation are based on NS 3031:2025.

Sources and regulations

Always check the current version of regulations and standards before using the numbers in a project.

Read next

Spend your time on judgment, not data entry

Proff gathers available building data, reads floor plans and builds an editable model, so you can calculate everything from houses to hospitals without the detours.