gadder
All energy calculation guides

Building types and professionals

Energy calculation for commercial buildings

Commercial buildings have more zones, more technical systems and more varied use than homes. A good energy calculation includes ventilation, cooling, lighting and operating hours, and is used to document TEK17, issue the energy certificate, apply for Enova support and choose upgrades that pay off.

What the energy calculation is used for

The same model can answer several questions over the life of the building:

  • Documenting the TEK17 energy frame for new buildings and major renovations
  • Issuing the energy certificate at sale, lease and completion, always by an expert
  • Documenting the reduction in energy use when applying for Enova support
  • Finding and prioritizing upgrades with profitability and life-cycle cost

What sets commercial buildings apart from homes

A commercial building is split into zones by use and systems. Offices, meeting rooms, retail areas, storage and plant rooms have different operating hours, internal loads and airflows. Many buildings have cooling, and ventilation is often a large item. That is why a dynamic calculation under NS 3031:2025 is needed, with the right usage profiles per zone.

  • Zones with their own usage profiles and set points
  • Ventilation with heat recovery, airflows and fan power
  • Cooling, solar shading and internal loads from people, equipment and lighting
  • Energy supply with heat pumps, district heating, boilers and solar panels

The energy frame varies with the building

The TEK17 energy frame depends on the building category: 115 kWh per m² of heated floor area for offices, 110 for schools, 170 for hotels and 180 for retail buildings. A building with several functions is calculated with each zone in its own category.

How Proff handles it

Commercial buildings in Gadder Proff

Proff is built for buildings with many zones and complex systems, and it accepts the BIM models and drawings you already have.

  • Import of IFC and gbXML with zones, constructions and windows from Revit and ArchiCAD
  • Multiple zones with thermal coupling between them, for all 13 building categories
  • Ventilation, cooling, heat pumps, district heating and solar panels in the same model
  • Energy certificates sent straight to Enova, and upgrade packages with life-cycle cost
Book a Proff demo

Questions and answers

It depends on size, number of zones and what material is available. With a BIM model or good floor plans, much of the modeling is automatic in Proff, so the time goes into checking and judgment.

Sources and regulations

Always check the current version of regulations and standards before using the numbers in a project.

Read next

Spend your time on judgment, not data entry

Proff gathers available building data, reads floor plans and builds an editable model, so you can calculate everything from houses to hospitals without the detours.