gadder

Enova support for homeowners

Enova support for your home: how to apply

Enova supports homeowners who insulate, replace windows, install a heat pump or put up solar panels. The condition that most often costs people the support is simple: you must apply before you start. Here you can see which measures qualify, how the application works and where to get help.

Detached house with solar panels on the roof and a covered terrace facing the garden

Measures Enova supports

Enova's support scheme for homes covers the building envelope, heating and hot water, and on-site energy production. Each measure has its own conditions, such as U-value requirements for insulation and windows or efficiency requirements for ventilation.

Air-to-air heat pumps, floor insulation and air sealing have no support scheme of their own. They can still pay off, but then they have to pay for themselves.

How to apply, step by step

You apply in Enova's application portal and log in with ID-porten. The order below is the one Enova itself describes.

  1. 1

    Choose the measure, but do not start

    Find the measure that suits the home. Enova only supports measures that have not started, and no costs may have been incurred before the application is registered.

  2. 2

    Read the conditions for the measure

    Each measure has its own requirements for workmanship and documentation. The work must follow them for the support to be paid out.

  3. 3

    Choose a contractor

    Enova recommends choosing the contractor before you apply. The contractor must be listed in one of the registers Enova accepts, such as central approval (sentral godkjenning), the Electrical Business Register, the Master Craftsman Register or the Norwegian Heat Pump Association's register.

  4. 4

    Apply and get a commitment

    Submit the application in Enova's portal. Once it is approved you receive a commitment, and only then can the work start.

  5. 5

    Finish within six months

    The measure must be completed within six months of the commitment. The deadline is shown on Enova's Min side. Ask the contractor to make sure the invoice has the details the conditions require.

  6. 6

    Request payment

    When the work is done, submit the final report with the invoice on Min side within the same deadline. If everything is in order, the support is paid within a few weeks.

Mistakes that cost you the support

Most of what goes wrong in an Enova application happens before it is sent or after the work is done.

  • Work has started, or a deposit has been paid, before the application is registered
  • The invoice lacks the details the conditions require, such as labour cost or product data
  • The insulation does not reach the U-value Enova requires, or there is no calculation showing it
  • The contractor is not listed in one of the registers Enova accepts
  • The six-month deadline for completion and payment runs out

Support for energy advice

Enova covers 25 percent of the invoiced cost of energy advice, up to NOK 5,000. The advisor must work for a company that meets Enova's competence requirements, and the invoice must show the labour cost of preparing an energy plan. The plan must give an overview of cost-effective measures for the building envelope or for heating and ventilation.

An advisor is especially useful when you insulate. The U-value is rarely stated on the quote or invoice, and the advisor's calculation shows how much insulation is needed to meet the requirement. If you do the measures over several years, a complete plan makes sure the first stage does not make the next one more expensive.

An energy plan you make yourself in Gadder gives you the overview, but it is not an invoiced plan from an advisor and therefore does not qualify for this support.

Read more about energy advice

Get help

Get help with your Enova application

Tell us which measures you are considering and where the home is. We will get in touch and help you with the application, from which measures qualify to the documentation Enova requires.

  • No obligation, you decide what to go ahead with
  • We usually reply within one working day

We use this information to respond to your inquiry. Read the Privacy Policy.

See which measures pay off in your home

Enter the address and Gadder builds an energy plan with the measures that suit the home, estimated cost, savings and Enova support. Then you know what to apply for before you contact contractors.

Get started now

Start with your address

Enter your address, and we will use available property data as the starting point for your plan.

Free to start—continue directly to your energy plan

The address search uses the Norwegian Mapping Authority's address service. How we handle your data.

Housing cooperatives, condominiums and commercial buildings

Housing companies and commercial buildings have their own Enova schemes, with requirements for calculations and energy certificates.

Questions and answers

No. Enova only supports measures that have not started, and no costs may have been incurred before the application is registered. Apply first, wait for the commitment and then start.

Sources

Rates and conditions change. Always check the current conditions with Enova before you apply.